Sharing the Look with Another Camera

You can share the look as a scene file with other cameras that support the save/load scene file functions. This function applies to the [Paint/Look] settings in the camera menu. For details about items that can be saved in a scene file, see “List of Menu Items.”

You can save/load a scene file using [Paint/Look] – [Scene File] in the web menu.

  1. Set the desired look using the setup items in the [Paint/Look] menu.

  2. Set the name for the look using [File Name].
    For details, see “Renaming a Scene File.”

  3. Execute [Store Internal Memory] to save the current look as a scene file in internal memory.

    For details, see “Storing a Look as a Scene File.”

  4. Open [Paint/Look] – [Scene File] in the web menu, press the [Save] button for the scene file that you want to share, and save the scene file from internal memory to the device running the Web App.

    For details, see “Saving a Scene File from Internal Memory to an External Device.”

  5. Save the scene file that was stored in step 4 to the device running the Web App for a sharing destination camera that supports this function.

  6. In the web menu on the sharing destination camera, select [Paint/Look] – [Scene File] and press the [Load] button to load the scene file.

    For details, see “Loading a Scene File Saved on an External Device into Internal Memory.”

  7. On the sharing destination camera, execute [Recall Internal Memory] to recall the scene file stored in internal memory.

    The look of the sharing source camera that was saved in step 3 is applied to the image quality settings of this camera.

Note

  • If a file with the same name already exists in the save destination, a copy counter is automatically appended to the name (depends on the web browser and OS specifications).
  • It is not possible to completely reproduce the image quality settings of the loaded scene file.
  • Setup items that exist in the loaded scene file but that do not exist on the camera that loaded the file will not be loaded.
  • Setup items that exist on the camera that loaded a scene file but that are not in the loaded scene file are set to the default value of the camera that loaded the file.
  • Where the setup items are the same but the configurable ranges in the menu are different, values within the supported range will be loaded.
  • Even when settings can be loaded, the image quality may not be the same due to differences in sensors and camera signal processing between models. Check the image quality after loading a file.
Go to Page Top
 
TP1002077737