Adjusting the Gain
You can adjust the gain when the shooting mode is set to [Custom] to adjust the brightness.
Adjusting the gain automatically
Press and hold an assignable button assigned with [ISO/Gain] to display the [AGC] direct menu and select [Auto].
Hint
- The same operation is supported by setting [Shooting] – [Auto Exposure] – [AGC] to [On] in the full menu.
- You can also assign [AGC] to an assignable button.
- When [Shooting] – [Image Stabilization] – [SteadyShot] is set to [Dynamic Active] in the full menu, the range of options for [ISO/Gain] that can be selected is narrower.
Adjusting the gain manually
You can control the gain when you want to adjust the exposure while using a fixed iris setting or when you want to prevent the gain increasing due to AGC.
- Press and hold an assignable button assigned with [ISO/Gain] to display the [AGC] direct menu and select [Manual].
- Press and hold an assignable button assigned with [ISO/Gain] to display the gain value direct menu and set the gain.
Hint
- You can also assign [Push AGC] to an assignable button, and set [AGC] to [On] temporarily while the button is pressed.
- You can also change the gain value using [Shooting] – [ISO/Gain] – [ISO/Gain Select] in the full menu.
Adjusting the gain (fine adjustment)
- Press and hold an assignable button assigned with [ISO/Gain] to display the gain value direct menu.
- Turn the multi-function dial to adjust the value.
Controlling the gain temporarily (fine adjustment)
Assign [ISO/Gain/EI] to the assignable dial and adjust the set value using the dial.
This is useful when you want to adjust the exposure by one step without changing the depth of field.
The temporarily adjusted value is canceled by switching the base sensitivity, setting [AGC] to [On], or turning the power off.
Hint
- You can also assign [ISO/Gain/EI] to the multi-function dial.
- You can also assign [Push AGC] to an assignable button, and set [AGC] to [On] temporarily while the button is pressed.
TP1002215299