[Monitoring] Menu

The following tables describe the function and settings of each menu item.

[Monitoring] – [Output On/Off]

Sets video output settings.

Menu item Sub-item setting Factory default value Description
[HDMI] [On] / [Off] [On] Turns HDMI output on/off.

[Monitoring] – [Output Format]

Sets output format settings.

Menu item Sub-item setting Description
[HDMI] For details about settings, see the following topic.
HDMI Output Connector Output Formats 		Sets the HDMI output resolution.

[Monitoring] – [Output Display]

Sets screen display output settings.

Menu item Sub-item setting Factory default value Description
[HDMI] [On] / [Off] [Off] Sets whether the menu, status, and other screen display are superimposed on the HDMI output signal.

[Monitoring] – [Display On/Off]

Selects the items to display on the shooting screen/playback screen.

Menu item Sub-item setting Factory default value Description
[Camera ID] [On] / [Off] [On] Selects the items to display on the shooting screen/playback screen.
[Frame Rate] [On] / [Off] [On]
[Shutter] [On] / [Off] [On]
[Iris] [On] / [Off] [On]
[ISO/Gain/EI] [On] / [Off] [On]
[Auto Exposure Mode] [On] / [Off] [On]
[Auto Exposure Level] [On] / [Off] [On]
[White Balance] [On] / [Off] [On]
[Battery Remain] [On] / [Off] [On]
[GPS] [On] / [Off] [On]
[Imager Mode] [On] / [Off] [On]
[Anamo. De-Squeeze] [On] / [Off] [On]
[Base ISO/Sensitivity] [On] / [Off] [On]
[Rec Format] [On] / [Off] [On]
[Rec Look] [On] / [Off] [On]
[Level Gauge] [On] / [Off] [On]
[Zoom Position] [Focal Length] / [Number] / [Bar] / [Off] [Focal Length]
[Focus Mode] [On] / [Off] [On]
[Focus Position] [On] / [Off] [On]
[Focus Area Indicator] [On] / [Off] [On]
[Subject Recognition Frame] [On] / [Off] [On]
[Tracking AF Pointer] [On] / [Off] [On]
[Focus Indicator] [On] / [Off] [On]
[Lens Info] [On] / [Off] [Off]
[Video Level Warning] [On] / [Off] [On]
[Gamma Display Assist] [On] / [Off] [On]
[Video Signal Monitor] [Off] / [Waveform] / [Vector] / [Histogram] [Off]
[TC Status] [On] / [Off] [On]
[Output Look] [On] / [Off] [On]
[HDMI Rec Control] [On] / [Off] [On]
[Network Status] [On] / [Off] [On]
[File Transfer Status] [On] / [Off] [On]
[Stream Status] [On] / [Off] [On]
[Image Stabilization] [On] / [Off] [On]
[UWP RF Level] [On] / [Off] [On]
[Audio Level Meter] [On] / [Off] [On]
[Timecode] [On] / [Off] [On]
[Look Name] [On] / [Off] [On]
[Rec/Play Status] [Always On] / [On] / [Off] [On]
[Rec Status Frame] [On] / [Off] [On]
[Tally] [On] / [Off] [On]
[Clip Name] [On] / [Off] [On]
[Media Status] [On] / [Off] [On]
[Clip Number] [On] / [Off] [On]
[Notice Message] [On] / [Off] [On]

[Monitoring] – [Frame Line]

Sets marker display settings.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [On] Turns the display of all markers on/off.
[Color] [White] / [Yellow] / [Cyan] / [Green] / [Magenta] / [Red] / [Blue] [White] Selects the marker signal color.
[Center Marker] 1 / 2 / 3 / 4 / [Off] [Off] Selects the center marker.
[Safety Zone] [On] / [Off] [Off] Turns the safety zone marker on/off.
[Safety Area] 80% / 90% / 92.5% / 95% 90% Selects the size of the safety zone marker (as a percentage of total screen size).
[Aspect Marker] [Line] / [Mask] / [Off] [Off] Selects the type of aspect marker.
[Aspect Mask] 0 to 15 12 Sets the level of the video signal outside the marker.
[Aspect Safety Zone] [On] / [Off] [Off] Turns the aspect safety zone marker on/off.
[Aspect Safety Area] 80% / 90% / 92.5% / 95% 90% Selects the size of the aspect safety zone marker (as a percentage of total screen size).
[Aspect Select] 1:1 / 4:3 / 13:9 / 14:9 / 15:9 / 17:9 / 1.66:1 / 1.85:1 / 2.35:1 / 2.39:1 / [Custom] 2.39:1 Sets the aspect ratio when displaying the aspect marker.
[Custom Aspect Ratio] Enter an arbitrary value 01.00:01.00

Sets the aspect ratio to an arbitrary value.

Note

  • This setting is enabled when [Aspect Select] is set to [Custom].
[Guide Frame] [On] / [Off] [Off] Turns the guide frame display on/off.
[100% Marker] [On] / [Off] [Off] Turns the 100% marker display on/off.
[User Box] [On] / [Off] [Off] Turns the user box marker display on/off.
[User Box Width] 3 to 479 240 Sets the user box marker width (distance from the center to the left and right edges).
[User Box Height] 3 to 269 135 Sets the user box marker height (distance from the center to the top and bottom edges).
[User Box H Position] −476 to +476 0 Sets the horizontal position of the center of the user box marker.
[User Box V Position] −266 to +266 0 Sets the vertical position of the center of the user box marker.

[Monitoring] – [LCD Monitor Setting]

Sets LCD monitor settings.

Menu item Sub-item setting Factory default value Description
[LCD Monitor Brightness] 1 to 15 8 Adjusts the brightness of the LCD monitor image.
[LCD Monitor Color Mode] [Color] / [B&W] [Color] Selects the display mode of the LCD monitor in E-E display/recording mode.
[LCD Monitor H/V Flip] [Auto] / [Horizontal Flip] / [H&V Flip] / [No Flip] [Auto] Selects flipping inversion of the LCD monitor image.

[Monitoring] – [VF Setting]

Sets viewfinder settings.

Menu item Sub-item setting Factory default value Description
[LCD Monitor/VF Select] [LCD Priority Auto] / [VF Priority Auto] / [LCD Monitor] / [VF] [LCD Priority Auto] Selects the LCD monitor or the viewfinder as the device to light.
[VF Brightness] 1 to 7 3 Adjusts the brightness of the viewfinder.
[VF Color Mode] [Color] / [B&W] [Color] Selects the color mode of the viewfinder.
[VF Magnification] [Standard] / [Zoom Out] [Standard] Selects the display magnification of the viewfinder.
[VF Image in HDR] [HDR] / [SDR(LCD Like)] [HDR] Sets the format of the image to display in the viewfinder in HDR mode.

[Monitoring] – [Gamma Display Assist]

Sets gamma display assist settings.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [On]

Turns the gamma display assist function on/off when [Custom] – [Target Display] – [HDR(HLG)] is selected.

Note

  • This is set to [Off] (fixed) when [Custom] – [Target Display] is set to [SDR(BT.709)] and in log shooting mode.

[Monitoring] – [Focus Map]

Sets focus mapping.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns the focus mapping function on/off.

[Monitoring] – [Peaking]

Sets peaking settings.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns peaking on/off.
[Peaking Level] [High] / [Mid] / [Low] [Mid] Sets the color peaking signal level.
[Color] [B&W] / [Red] / [Yellow] / [Blue] [B&W] Selects the color of the color peaking signal.

[Monitoring] – [Zebra]

Sets zebra pattern settings.

Menu item Sub-item setting Factory default value Description
[Setting] [Off] / [Zebra1] / [Zebra2] [Off] Selects the zebra display type.
[Zebra1 Level] 0% to 109% 70% Sets the [Zebra1] display level.
[Zebra1 Aperture Level] 1% to 20% 10% Sets the [Zebra1] aperture level.
[Zebra2 Level] 0% to 109% 100% Sets the [Zebra2] display level.

[Monitoring] – [Focus Magnifier]

Sets the focus magnifier.

Menu item Sub-item setting Factory default value Description
[Focus Mag Button Target] [LCD Monitor/VF] / [HDMI] [LCD Monitor/VF] Sets the focus magnification target to operate using an assignable button.
TP1002215353