Recording Format

Project frame rate

You can switch the project frame rate for recording video.

Switch using [Project] – [Project Frame Rate] in the menu. The unit may reboot automatically after switching, depending on the selected value.

Hint

  • Can also be configured using [Project] – [Rec Format] – [Project Frame Rate] in the full menu.

Note

  • You cannot switch the project frame rate during recording or playback.

Imager mode

You can set the effective picture size and resolution of the image sensor.

Switch using [Project] – [Imager Mode] in the menu.

  • FF 5K 3:2, FF 5K 17:9, FF 5K 16:9, FFc 4.5K 17:9, FFc 4.5K 16:9, FFc 3.8K 16:9: Use for full-frame size.
  • S35 3.2K 16:9: Use for Super 35mm size.

Hint

  • Can also be configured using [Project] – [Rec Format] – [Imager Mode] in the full menu.

Note

  • You cannot switch the imager mode during recording or playback.

Internal recording / RAW output

You can set the internal recording and external RAW output combination.

Set using [Project] – [Rec Format] – [Internal Rec / RAW Out] in the full menu.

Note

  • The following imager modes are required to configure external RAW output.

    • FFc 4.5K 17:9
    • FFc 4.5K 16:9

Codec

You can switch the codec for recording video.

Switch using [Project] – [Codec] in the menu.

Hint

  • Can also be configured using [Project] – [Rec Format] – [Codec] in the full menu.

Note

  • You cannot switch the codec during recording/playback.
  • Restrictions may apply to the signal from the HDMI output connector, depending on the codec setting.

Video format

You can set the video format for recording video.

Switch using [Project] – [Video Format] in the menu.

Hint

  • Can also be configured using [Project] – [Rec Format] – [Video Format] in the full menu.

Note

  • You cannot switch the video format during recording or playback.
  • Restrictions may apply to the signal from the HDMI output connector, depending on the video format setting.

Image quality

You can set the image quality for recording video.

Set using [Project] – [Rec Format] – [Quality] in the full menu.

Note

  • You cannot switch the image quality during recording/playback.
TP1002215259