[TC/Media] Menu

The following tables describe the function and settings of each menu item.

[TC/Media] – [Timecode]

Sets timecode settings.

Menu item Sub-item setting Factory default value Description
[Mode] [Preset] / [Regen] / [Clock] [Preset] Sets the timecode running mode.
[Preset]: Starts running from a preset value.
[Regen]: Starts running from the timecode of the end of the previous clip.
[Clock]: Uses the internal clock as the timecode.
[Run] [Rec Run] / [Free Run] [Rec Run] [Rec Run]: Runs only when recording.
[Free Run]: Always running, regardless of recording operation.
[Manual Setting] – – Sets the timecode to an arbitrary value.
[Set]: Apply setting.
[Reset] [Execute] / [Cancel] – Resets the timecode to 00:00:00:00.
[Execute]: Execute function.
[TC Format] [DF] / [NDF] [DF] Sets the timecode format.
[DF]: Drop Frame
[NDF]: Non-Drop Frame
[USB Timecode] [On(PORT2)] / [Off] [Off] Enables/disables the USB TC IN adaptor connection.

[TC/Media] – [TC Display]

Sets time data display settings.

Menu item Sub-item setting Factory default value Description
[Time Data Display] [Timecode] / [Users Bit] / [Duration] [Timecode] Switches the time data display.

[TC/Media] – [Users Bit]

Sets settings related to user bits.

Menu item Sub-item setting Factory default value Description
[Mode] [Fix] / [Time] [Fix] Sets the user bit mode.
[Fix]: Uses an arbitrary fixed value in user bits.
[Time]: Uses the current hour, minute, and second in user bits.
[Manual Setting] – – Sets the user bits to an arbitrary value.

[TC/Media] – [HDMI TC Out]

Sets settings related to timecode output when using HDMI.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Sets whether to output the timecode to devices for other purposes using HDMI.

[TC/Media] – [Clip Name Format]

Sets settings related to clip naming.

Menu item Sub-item setting Factory default value Description
[Auto Naming] [Cam ID + Reel#] / [Title] [Cam ID + Reel#] Sets whether clip names use the values set in [Camera ID] and [Reel Number], or an arbitrary name set in [Title Prefix].
[Camera ID] A to Z A Sets the camera ID used when generating clip names.
[Reel Number] 001 to 999 001 Sets the [Reel Number] numeric part used when generating clip names.
[Camera Position] C / L / R C Sets the leading character of the shot number used when generating clip names.
[Clip Number] [Series] / [Reset] [Series]

Sets the numbering method of clip numbers.
[Series]: A method of generating numbers starting from a series number counter stored in the unit. However, if the largest number among the clips on a memory card is greater than the series number counter, the numbering will start from that number.
[Reset]: A method of numbering starting from the largest number among the clips on a memory card.

Note

  • Configurable only when [Codec] is set to a codec other than X-OCN.
[Series Counter Reset] [Execute] / [Cancel] –

Resets the series number counter stored in the unit.
[Execute]: Execute function.

Hint

  • Each time a clip is recorded, the series number counter is updated with the number of that clip.

Note

  • Configurable only when [Codec] is set to a codec other than X-OCN.
[Title Name Settings] Enter an arbitrary character C

Sets the title part of the clip name.

Note

  • Enter 1 to 37 valid input characters. The following are valid input characters.
    Alphabetic characters (uppercase and lowercase), numeric characters, symbols (! # $ % ( ) + , - . ; = @ [ ] ^ _ ~)
  • Configurable only when [Codec] is set to a codec other than X-OCN.
[XAVC S Root Folder Name] [M4ROOT] / [Cam ID + Reel#] [M4ROOT]

Sets the volume label name and root folder name for the recording media (XAVC S files).

Hint

  • If compatibility is required with models that do not have an XAVC S root folder naming function, leave this setting at the factory default value.

[TC/Media] – [Update Media]

Updates the management file on memory cards.

Menu item Sub-item setting Description
[Media(A)] [Execute] / [Cancel] Updates the management file on the memory card in card slot A.
[Execute]: Execute function.
[Media(B)] [Execute] / [Cancel] Updates the management file on the memory card in card slot B.
[Execute]: Execute function.

[TC/Media] – [Format Media]

Initializes memory cards.

Menu item Sub-item setting Description
[Media(A)] [Full Format] / [Quick Format] / [Cancel] Formats the memory card in card slot A.
[Media(B)] [Full Format] / [Quick Format] / [Cancel] Formats the memory card in card slot B.
TP1002215352