GAMMA DISP ASSIST

When shooting or playing the movies with S-LOG or HLG applied, you can convert movie images displayed on the viewfinder or LCD monitor to a movie with normal image quality (Movie mode only).

  1. MENU button - (DISPLAY SET) - [GAMMA DISP ASSIST] ‒ select the desired item.

Descriptions of menu items

ON/OFF:

Sets the gamma display assist function to on/off.

  • ON: Use the gamma display assist function.
  • OFF: Does not use the gamma display assist function.


TYPE:

Sets the convert type.

  • AUTO: Displays movies with gamma or color mode set in [PICTURE PROFILE] after converting to the following.
    • Gamma [S-LOG2] to [S-LOG2→709(800%)]
    • Gamma [S-LOG3] to [S-LOG3→709(800%)]
    • Gamma [HLG], [HLG1], [HLG2], [HLG3] and color mode [709] to [HLG(709)]
    • Gamma [HLG], [HLG1], [HLG2], [HLG3] and color mode [BT.2020] to [HLG(BT.2020)]
  • S-LOG2→709(800%): Displays movies after converting S-LOG2 gamma to the gamma equivalent to ITU709(800%).
  • S-LOG3→709(800%): Displays movies after converting S-LOG3 gamma to the gamma equivalent to ITU709(800%).
  • HLG(709): Displays movies after adjusting the image quality of the camcorder's LCD panel or viewfinder to a quality that is almost the same as when movies are displayed on an HLG(709) compatible monitor.
  • HLG(BT.2020): Displays movies after adjusting the image quality of the camcorder's LCD panel or viewfinder to a quality that is almost the same as when movies are displayed on an HLG(BT.2020) compatible monitor.

About the gamma display assist function

Movie images applied with [S-LOG2] or [S-LOG3] have low contrast because they are assumed to be processed after recording.
Also, movie images applied with [HLG], [HLG1], [HLG2] or [HLG3] are displayed in low contrast if the images are displayed in a finder or LCD monitor which does not support HDR, and movie images with the [BT.2020] color mode setting are displayed in faint color. Either of the images are therefore difficult to monitor as it is.
Using [GAMMA DISP ASSIST], an image contrast equivalent to that of movies recorded normally can be reproduced on the LCD monitor or viewfinder of the camcorder, and this makes it easy to monitor the image.

Note

  • When setting to [AUTO] during playback, images of the AVCHD and XAVC S movies other than those recorded with [HLG] are displayed based on the current gamma setting and color mode setting in [PICTURE PROFILE].

Hint

  • You can assign this function to the ASSIGN button.