Adjusting the White Balance Manually
You can adjust the white balance manually.
-
Press the [White Balance] button in the camera basic configuration panel.
The frame of the [White Balance] button changes to orange.
The White Balance adjustment panel appears.
-
Press the [White Mode] button and select one of the following from the list.
[Memory A(T/T)]
[Memory A(R/B)]
[Preset]
-
Adjust the white balance using the sliders or adjustment buttons.
Hint
- The slider and adjustment button settings are linked.
- The difference between [Memory A(T/T)] and [Memory A(R/B)] is that the axis of adjustment is different, but the adjustment results are linked.
For [Memory A(T/T)]
This mode adjusts the white balance saved in memory A by adjusting the color temperature (Temp) and Tint.
You can set the color temperature in 20 K increments in the range 2000 K to 5600 K. Values above 5600 K can be set at intervals equal to the amount of color change (mired) from 5580 K to 5600 K.
Pressing the [Reset] button on the right side of [Temp] or [Tint] restores the corresponding setting to the default value.
For [Memory A(R/B)]
This mode adjusts the white balance saved in memory A by adjusting the R Gain and B Gain.
Pressing the [Reset] button restores the corresponding gain setting to the default value.
For [Preset]
This mode adjusts the color temperature to a preset value.
You can set the value in 100 K increments.
In preset mode, you can also assign [Preset White Select] to an assignable button, and press the button to change to a preconfigured preset value.
[Custom]: 3200 K → 4300 K → 5600 K → 6300 K → 3200 K…
[Flexible ISO], [Cine EI], [Cine EI Quick]: 3200 K → 4300 K → 5500 K → 3200 K…
