Calibrating an E-Mount Lens
Calibration corrects for differences in the zoom position due to differences in individual lenses when using an E-mount power zoom lens.
To calculate the zoom position accurately, calibrate your lens to correct for individual differences in the lens using the following procedure.
-
If the lens has a SERVO/MANUAL switch, set to the SERVO position.
Note
- The lens will be unable to receive zoom instructions from the unit if the switch is set to MANUAL.
-
Run the calibration using [Technical] > [Lens] > [Lens Calibration] in the camera menu.
During calibration, the zoom lens moves automatically and is measured.
Calibration data
- Calibration data for up to five lenses can be saved in the unit. The oldest data will be overwritten when a 6th or subsequent lens is calibrated.
- You can check whether calibration data is available for the attached lens by pressing the
(Camera status) button in the common area of the Web App screen and selecting [Lens] > [Calibration Data].
