Resetting the Pan/Tilt

You can reset the pan/tilt, for example, when you replace the lens, using the following procedure.

  1. Slide the pan/tilt lock lever to the UNLOCK position and check that the pan/tilt of the camera head is unlocked.
  2. Execute the pan/tilt reset function.

    Pan/tilt reset can be executed from the infrared remote control, Web App, or the RM-IP500 Remote Controller (option).

    • Operation using the infrared remote control: Press the P/T RESET button.
    • Operation using the Web App: Press the (Pan/tilt reset) button on the (Others) tab in the camera control panel on the live operation screen.
    • Operation using the RM-IP500: Refer to the operating instructions for the RM-IP500.

    Note

    • Executing pan/tilt reset causes the camera head and lens to turn. Check that the lens is not obstructed before executing.
    • The unit has a function that limits the pan/tilt range, but this function is disabled when the unit is turned on or pan/tilt reset is executed.

    Hint

    • When pan/tilt reset is completed, the unit returns to the pre-execution position.
Go to Page Top