About Operation Using an RM-IP500 Remote Controller (option)
You can operate the unit using a Sony RM-IP500 Remote Controller running software version 2.2 or later. The devices communicate using VISCA over IP (LAN).
Depending on the target item to operate, you may need to view the screen display of the unit. Prepare a monitor that can be used to check the screen display.
The following operations are supported from an RM-IP500 Remote Controller.
- Selecting the target camera
- Adjusting the framing (pan, tilt, zoom)
- Adjusting the focus (excludes touch operation)
- Registering and recalling preset positions
- Operating the menu of the unit (excluding the web menu)
- Adjusting the brightness
- Adjusting the white balance
- Adjusting the black balance
- Adjusting the audio input level
- Starting/stopping recording
- Executing assignable button functions of the unit
- Lens controller initialization operations
- PTZ auto framing operation
* Function in RM-IP500 version 2.30 and later.
For details about RM-IP500 operation, refer to the operating instructions for the RM-IP500.
Note
- When the PRESET button is pressed during auto framing pan/tilt operation, the first press pauses auto framing. Make sure that pan/tilt operations have stopped, and then press the PRESET button again to recall a preset.
Hint
- When using an RM-IP500, use the panel sheet for this unit that is supplied with the RM-IP500.
RM-IP500 (using panel sheet for this unit)
