Stream
Sets streaming settings (see “About Streaming”).
Stream Setting
Sets settings related to the streaming protocol.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| Setting | RTSP / RTMP / SRT-Caller / SRT-Listener / NDI|HX / Off | RTSP | Selects the streaming protocol. |
Note
- To use RTMP, set [Stream] > [Audio Stream] > [Setting] to [On] beforehand.
RTSP
The following items are displayed when [Stream Setting] is set to [RTSP].
Sets settings related to RTSP streaming.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| Port Number | 554, 1024 to 65534 | 554 | Sets the RTSP port number. |
| Time Out | 0 to 600 | 60 | Sets the timeout of the Keep Alive command for RTSP streaming. |
| Authentication | On / Off | On | Turns the RTSP authentication function on/off. |
| Video Port Number 1 | 1024 to 65534 | 51000 | Sets the port number for sending video 1 for RTSP unicast streaming. |
| Video Port Number 2 | 1024 to 65534 | 53000 | Sets the port number for sending video 2 for RTSP unicast streaming. |
| Audio Port Number | 1024 to 65534 | 57000 | Sets the port number for sending audio for RTSP unicast streaming. |
RTMP
The following items are displayed when [Stream Setting] is set to [RTMP].
Sets settings related to RTMP streaming.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| Server URL | – | – | Sets the RTMP or RTMPS connection destination URL. |
| Stream Key | – | – | Sets the stream key obtained from the RTMP server side. |
| Root Certificate | – | – | Loads the root certificate required for connection with the RTMP server. Press the [Load] button and select a root certificate on the displayed screen. Press the [Delete] button to delete the loaded root certificate. The status is displayed in [Root Certificate Status]. |
SRT
The following items are displayed when [Stream Setting] is set to [SRT-Caller] or [SRT-Listener].
Sets settings related to SRT streaming.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| Destination | – | – | Sets the connection destination URL when the unit is operating as a caller. |
| Port Number | 1024 to 65534 | 4201 | Sets the port number for listening when the unit is operating as a listener. |
| Latency | 20 to 8000 ms | 120 | Sets the latency. |
| TTL | 1 to 255 | 64 | Sets the TTL value. |
| Encryption | Off / AES128 / AES256 | Off | Enables/disables encryption and sets the encryption method. |
| Passphrase | 0 or string of 10 to 79 characters | 0 | Sets the passphrase used for encryption. Press Reset to clear the entered passphrase. |
| ARC | On / Off | On | Turns the Adaptive Rate Control function on/off. |
NDI|HX
The following items are displayed when [Stream Setting] is set to [NDI|HX].
Sets settings related to NDI|HX.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| License | – | – | Displays the installation state of the NDI license key. |
| Source Name | – | – | Displays the NDI source name. |
| Group | On / Off | Off | Turns the NDI grouping function on/off. |
| Group Name | – | – | Displayed when the NDI grouping function is set to On. Sets the group name. |
| Discovery Server 1 | – | – | Sets NDI discovery server 1. |
| Discovery Server 2 | – | – | Sets NDI discovery server 2. |
| Multicast Mode | On / Off | Off | Turns multicast streaming on/off. |
| Multicast Prefix | 239.255.0.0 | 239.255.0.0 | Displayed when [Multicast Mode] is set to On. Sets the prefix to use for multicast streaming. |
| Multicast Netmask | 255.255.0.0 | 255.255.0.0 | Displayed when [Multicast Mode] is set to On. Sets the netmask that determines the multicast address range. |
| Multicast TTL | 1 to 255 | 3 | Displayed when [Multicast Mode] is set to On. Sets the TTL value for multicast streaming. |
| Multi-TCP Mode | On / Off | Off | Turns Multi-TCP mode on/off. |
| Unicast UDP Mode | On / Off | On | Turns Unicast UDP mode on/off. |
