Switching the Bokeh Control Function On/Off

You can easily adjust the degree of bokeh by linking the ND filter and gain to the iris operation.

Switching the bokeh control function on/off

This function can be enabled only when adjusting the exposure manually. Set the ND filter to variable mode, then set the iris, gain, shutter, and ND filter to manual adjustment.

You can switch the bokeh control function on/off using [Shooting] > [Iris] > [Bokeh Control] in the camera menu.

When the bokeh control function is set to On, a (B) icon is displayed on the ND filter and gain indicators.

Note

  • This function is enabled only on E-mount lenses that can communicate with the unit.
  • The maximum effect of this function can be obtained using a Sony E-mount lens.
  • The bokeh control function is set to Off when any of the following operations is performed.
    • When the unit is turned off
    • When any of the iris, gain, shutter, or ND filter is set to Auto
    • When the shooting mode is switched
    • When the ND filter is set to clear or preset mode
    • When the lens is removed
    • When the unit reboots, for example, after switching the frequency

Hint

  • You can also assign the [Bokeh Control] function to an assignable button and switch the bokeh control function between On and Off using the button.
Go to Page Top