Lens Controller
Sets settings for a connected lens controller (option).
For details, see “Connecting a Lens Controller.”
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| Setting | On / Off | Off | Sets whether to use the lens controller (option). |
| Mode | 0 to 15 | 0 | Sets the operating mode of the lens controller (option). Values in the range 0 to 15 are available, but the actual values that can be selected will vary depending on the lens controller (option). For details, refer to the operating instructions of the lens controller. |
| Reverse | On / Off | Off | Reverses the direction of rotation of the lens controller (option). |
| Initialize | – | – | Initializes the lens controller (option). |
Note
- When [Setting] is changed, the unit will reboot. Reload the page in the web browser.
Hint
- When using PTZ auto framing, set the acceleration/deceleration to maximum. Also, note that the accuracy will vary depending on the lens. Check the operation before use.
