Checking the Lens Switches
The following checks and settings are required, depending on the type of lens.
For a lens with a focus mode switch
Set the switch to AF/MF or AF.
If the switch is set to MF or Full MF, the focus can only be adjusted using the lens ring.
Note
- When using an A-mount lens, manual adjustment from a remote control unit may not be available.
For a lens with a zoom switch
Set the switch to SERVO.
If the switch is set to MANUAL, the zoom can only be adjusted using the zoom ring. Zoom control from the unit has no effect.
For a lens with an Auto Iris switch
Set the switch to AUTO.
When not set to AUTO, the iris can only be adjusted using the lens ring. Iris operation from the unit has no effect.
For a lens with an image stabilization switch
Set the switch to OFF.
If the switch is set to ON, unexpected behavior may occur during pan/tilt operation.
SELP28135G
A: Move the focus ring to the forward position (AF/MF mode).
B: Set the ZOOM switch to the SERVO position.
C: Set the iris ring to “A” and the IRIS LOCK switch to the LOCK position.
D: Set the image stabilizer switch to OFF.
