Selecting a Look

This topic describes how to select a look.

  1. Check that [Project] > [Base Setting] > [Shooting Mode] is set to [Custom] in the web menu or camera menu.

    Hint

    • In [Custom] mode, the [ISO/Gain] button and [Scene File] button are displayed in the camera basic configuration panel.
  2. Press the [Scene File] button in the camera basic configuration panel.

    The frame of the [Scene File] button changes to orange.

    The Scene File adjustment panel appears.

  3. Press the [Scene File] button on the adjustment panel and select a scene file with the desired look from the list.

    The following presets are configured by factory default.

    [Target Display] [SDR(BT.709)] [HDR(HLG)]
    Scene file 1 [S-Cinetone] [HLG Live]
    Scene file 2 [Standard] [HLG Natural]
    Scene file 3 [Still] (Not registered)
    Scene file 4 [ITU709] (Not registered)
    Scene file 5 [709tone] (Not registered)
    Scene files 6 to 16 (Not registered) (Not registered)

    Hint

    • You can also select a look using [Paint/Look] > [Scene File] > [Recall] in the camera menu. You can also recall a preset look using [Scene File] > [Preset Recall].

    Note

    • Scene file 5 preset is set to [709tone] with software version 2.0 or later. It is displayed when [Maintenance] > [Reset] > [Factory Default] in the web menu is executed.
Go to Page Top