Adjusting the Zoom Using the Web App

You can adjust the zoom of the unit using optical zoom or Clear Image Zoom. This topic describes how to make adjustments using the Web App. For details about Clear Image Zoom, see “Setting the Zoom Type.”

  1. Press the (Pan/tilt/zoom) tab in the framing control panel to display the pan/tilt control panel.
  2. Slide the [Zoom] slider knob in the [T] (Telephoto) direction or [W] (Wide) direction to adjust the zoom.

    The zoom speed varies with the movement of the slider.

Note

  • Depending on the direction of the camera, the focal length of the lens, and the zoom position, part of the unit or cables connected to the connector block may be visible. Before shooting, check the field of view for the lens and focal length you are using. You can also control the pan/tilt range using [Pan-Tilt] > [P/T Range Limit] in the web menu. When the unit is turned on or pan/tilt reset is executed, this range limit setting is ignored. For details, see [Pan-Tilt] > [P/T Range Limit] in the web menu.
  • The actual zoom speed and accuracy will vary depending on the lens. Check the operation before use.

Hint

  • You can control the zoom of a manual zoom lens by using a lens controller (option) that is compatible with this unit. For details, see “Connecting a Lens Controller” and “Adjusting the Zoom Using a Lens Controller.”
Go to Page Top