Adjusting the Zoom Using the Supplied Infrared Remote Control

You can adjust the zoom of the unit using optical zoom or Clear Image Zoom. This topic describes how to make adjustments using the supplied infrared remote control. For details about Clear Image Zoom, see “Setting the Zoom Type.”

  1. Press the zoom button to adjust the zoom.

    Press the T (Telephoto) or W (Wide) button while monitoring the screen to adjust the zoom.

    To zoom in, press the T button.

    To zoom out, press the W button.

Note

  • Depending on the direction of the camera, the focal length of the lens, and the zoom position, part of the unit or cables connected to the connector block may be visible. Before shooting, check the field of view for the lens and focal length you are using. You can also control the pan/tilt range using [Pan-Tilt] > [P/T Range Limit] in the web menu. When the unit is turned on or pan/tilt reset is executed, this range limit setting is ignored. For details, see [Pan-Tilt] > [P/T Range Limit] in the web menu.

Hint

  • You can control the zoom of a manual zoom lens by using a lens controller (option) that is compatible with this unit. For details, see “Connecting a Lens Controller” and “Adjusting the Zoom Using a Lens Controller.”
Go to Page Top