Registering a File Transfer Destination

You can register a transfer destination server before starting a file transfer.

  1. Select [Network] > [File Transfer] > [Default Upload Server] > [Server Settings1] (or [Server Settings2], [Server Settings3]) in the web menu.

    Hint

    • The name of the selection option will change according to [Display Name] configured in the next step.
  2. Configure the following items for [Network] > [FTP Server 1] to [FTP Server 3] in the web menu.

    [Display Name]

    Enter the name of the server to display in the transfer job list when selecting a transfer destination server.

    [Service]

    Displays the server type.

    [FTP]: FTP server

    [Host Name]

    Enter the address or host name of the server.

    [Port]

    Enter the port number of the server to connect.

    [User Name]

    Enter the user name.

    [Password]

    Enter the password.

    [Passive Mode]

    Turn passive mode on/off.

    [Destination Directory]

    Enter the name of the directory on the destination server.

    Note

    • If characters that are invalid on the destination server are entered in [Destination Directory], files will be transferred to the user’s home directory. Invalid characters will vary depending on the server.

    [Using Secure Protocol]

    Set whether to perform secure FTP transfer.

    [Root Certificate]

    Load/clear a certificate.

    [Load]: Load a CA certificate. Loads PEM-format certificates.

    [Clear]: Clear the CA certificate.

    [None]: Do not load or clear a certificate.

    Note

    • Set the clock of the unit to the correct time before loading a CA certificate.
    • When recording in XAVC-I 4096×2160P/3840×2160P 59.94/50P, [Load] cannot be selected.

    [Root Certificate Status]: Displays the load status of the certificate.

    [Reset]: Resets the Server Settings settings to the defaults.

Go to Page Top