Select on Cam & Send (transferring to a smartphone)

You can transfer images to a smartphone by selecting images on the camera.

Refer to “Pairing the camera with a smartphone (Smartphone Connection) ” to pair the camera and smartphone in advance.


The following is the procedure for transferring the image currently displayed on the camera.

  1. MENU → (Network) → [Cnct./Remote Sht.] → [Select on Cam & Send] → [Size of Sending Image], [RAW+J/H Send Target], [Sending Target] and [Movie with Shot Mark] → desired setting.
  2. Display the image to be transferred on the playback screen.
  3. MENU → (Network) → [Cnct./Remote Sht.] → [Select on Cam & Send] → [Send] → [This Image].
  4. Launch Creators' App on your smartphone.

    A message indicating that the transfer has started will appear.

  5. Select [OK] on the smartphone.
    The image will be transferred to the smartphone.
    • Even while a transfer is in progress, you can perform the following operations:
      • Shooting
      • Menu Operations
      • Pausing an ongoing transfer
      • Resuming or canceling a paused transfer
      • Scheduling additional transfers
    • The (transferred) icon will be displayed on images that have been transferred.
    • You can transfer multiple images at once by selecting a setting other than [This Image] under [Send].

Menu item details

Send:
Selects images and transfers them to a smartphone. ([This Image]/[All Images in This Group]/[All with this date]/[All Filtered]/[Add filter condition]/[Manual selection])
  • The options displayed may differ depending on the setting for [Playback Filter Condition] and the selected content.
  • If you select [Manual selection], select the desired images using the center of the control wheel, then press MENU → [Enter]. You can also specify the range using the Fn (Function) button.
  • When [Disp Set of Multi Media] is set to [All Slots ], only [This Image] can be selected.
Size of Sending Image:
Selects the file size for images to be transferred to the smartphone. The original-sized JPEG/HEIF file or a 2M-equivalent JPEG/HEIF file can be transferred. ([Original]/[2M])
RAW+J/H Send Target:
Selects the file type for images to be transferred to a smartphone when the images are shot with [File Format] set to [RAW & JPEG] or [RAW & HEIF]. ([JPEG & HEIF]/[RAW]/[RAW+J & RAW+H])
Sending Target:
Sets whether to transfer the low-bit-rate proxy movie or the high-bit-rate original movie when transferring a movie to a smartphone. ([Proxy Only]/[Original Only]/[Proxy & Original])
When you select [Proxy Only], movies can be transferred faster than when transferring the original movies.
Movie with Shot Mark:
Cuts and transfers a specified number of seconds from a movie with the position of a Shot Mark set as the center. ([Cut to 60 seconds]/[Cut to 30 seconds]/[Cut to 15 seconds]/[Don't Cut])


To filter the images to be transferred (Add filter condition)

Images to be transferred can be filtered by the following conditions:

  • Target Group: [This Date]/[This Media]
  • Still Images/Movies: [All]/[Only Still Images]/[Only Movies]
  • Target Img (Rating): []-[], []
  • Target Movie (): [All]/[Only Shot Mark Mov.]
  • Target Img (Protect): [All]/[Only Protected Img.]

  • Transfer Status *: [All]/[Only Non-transfer]

    *Images transferred by selecting them on the smartphone are treated as not yet transferred.

    *When [Movie with Shot Mark] is set to an item other than [Don't Cut], even if you have already transferred a clip by using a Shot Mark and then set another Shot Mark to the movie, all of the Shot Marks will create clips which will be retransferred as not-yet transferred images.


To add a Shot Mark to a movie

If you add a Shot Mark while recording a movie, you can use it as a mark for selecting, transferring, or editing the movie. To add a Shot Mark during recording, swipe left or right on the screen to display the touch function icons, and then touch (Add Shot Mark1). You can also add a Shot Mark during playback by touching (Add Shot Mark1) on the screen.


About the transfer icons

  • Current transfer status icons

    (Transferring): Images are being transferred to your smartphone.

    (Transfer error)*: The connection was lost while transferring images to the smartphone by operating the camera. You can check the details of the error by opening the [Select on Cam & Send] menu.

    *If a transfer error occurs while transferring images by operating the smartphone, this icon will not be displayed.

  • Transfer status icons on played-back images

    (Transferring): The image currently being played back is being transferred to your smartphone.

    (Transferred)*: The image currently being played back has been transferred to the smartphone.

    *For images transferred by selecting them on the smartphone, this icon will not be displayed.

Hint

  • Even if a transfer stops due to a network failure, you can simply resume the transfer from the camera once the connection is restored, and the remaining images will then be transferred.
  • To use the touch function icons, enable touch operations during shooting or playback by configuring each setting in MENU → (Setup) → [Touch Operation] → [Touch Panel Settings].
  • While the playback filter function is used, you can set the filtered images as the target to transfer by selecting [All Filtered] in [Send].
  • Use a custom key or the shutter button to add a second Shot Mark (Shot Mark 2). Shot Mark 1 can also be added using a custom key or the shutter button.
    • When adding a Shot Mark with a custom key: assign [Add Shot Mark1] or [Add Shot Mark2] in [Custom Key/Dial Set.] and press the assigned button while shooting.
    • When adding a Shot Mark with the shutter button: set [ with Shutter Button] to [Add Shot Mark1] or [Add Shot Mark2] and press the shutter button while shooting.
    • When adding a Shot Mark while playing back a movie: assign [Add/Delete Shot Mark1] or [Add/Delete Shot Mark2] in [Custom Key Setting] and press the assigned button during playback.
  • For movies with a Shot Mark, you can jump to the position with the Shot Mark by touching the touch function icon while paused.

Note

  • Transfers initiated from the smartphone cannot be paused or canceled on the camera.
  • While transferring images by operating your smartphone, you can schedule additional transfers from the camera, but it may take some time before the transfer begins.
  • Even if you cancel the transfer midway, the images that have already been transferred will remain.
  • If the camera is turned off, restarted, or disconnected during a transfer, the transfer will be paused.
  • Depending on the smartphone, the transferred movie may not be played back correctly. For example, the movie may not play smoothly, or there may be no sound.
  • Depending on the format of the still image, movie, slow-motion movie, or quick-motion movie, it may not be possible to play it back on a smartphone.
  • When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone. Set [Airplane Mode] to [Off].
TP1001661350