Rear side

Illustration of the rear side of the camera

  1. Viewfinder
  2. Eyepiece Cup

    To remove the eyepiece cup

    Push the grips at the bottom of the eyepiece cup to the left and right and lift up the cup.

  3. For shooting: C3 button (Custom button 3)
    For viewing: (Protect) button
  4. MENU button
  5. Monitor (For touch operation: Touch panel/Touch pad)

    You can adjust the monitor to an easily viewable angle and shoot from any position. For details, see “Adjusting the monitor angle.”

    • You may not be able to adjust the monitor angle depending on the type of a tripod you use. In such a case, release the tripod screw once to adjust the monitor angle.
    • Do not apply excessive force when opening, closing, or rotating the monitor. Doing so may cause a malfunction.
  6. Eye sensor
  7. Diopter-adjustment dial

    Adjust the diopter-adjustment dial according to your eyesight until the display appears clearly in the viewfinder. If it is hard to operate the diopter-adjustment dial, remove the eyepiece cup before operating the dial.

  8. C1 button (Custom button 1)
  9. For shooting: AF-ON (AF On) button
    For viewing: (Enlarge) button
  10. For shooting: AEL button
    [AEL hold] is assigned to the AEL button in the default settings.
    For viewing: (Image index) button
  11. Multi-selector
  12. For shooting: Fn (Function) button
    For viewing: (Send to Smartphone) button

    You can display the screen for transferring images to a smartphone by pressing this button.

  13. Control wheel
  14. Access lamp
  15. For shooting: C4 button (Custom button 4)
    For viewing: (Delete) button
  16. (Playback) button

Adjusting the monitor angle

  • When holding the camera in the high or low position, pull the monitor toward you to adjust the angle.

Illustration showing how the monitor can be rotated

(A): Where to place your fingers

(B): Approx. 98° from the rear surface of the camera

(C): Approx. 40° from the rear surface of the camera


  • In the self-portrait position with the monitor open sideways and the lens facing toward you, the monitor image is flipped horizontally. Rotate the monitor backwards to cancel the flipped display.

Illustration showing how the monitor can be rotated

(A): Where to place your fingers

(B): Approx. 180°

(C): Approx. 270°


  • When you want to switch the display orientation to the self-portrait mode with the monitor pulled out, rotate the monitor all the way in the direction of (A). If you want to cancel the display orientation for the self-portrait mode, rotate the monitor all the way in the direction of (B) (when [Monitor Flip Direction] is set to [Auto]).

Illustration showing how the monitor can be rotated

  • In the default settings, the inversion of the display is automatically switched on and off depending on how the monitor is positioned. You can lock the display method with the following settings: MENU → (Setup) → [Finder/Monitor] → [Monitor Flip Direction].
Go to Page Top