Enlarge Screen

You can enlarge the menu screen display. (Some menu screens do not support the enlarging function.)

This function can be used when the camera’s system software (firmware) is Ver.4.00 or later.

  1. MENU → (Setup) → [Accessibility] → [Enlarge Screen] → Select an item to set, and then select the desired setting.

Menu item details

Enlarge Menu Scrn:
Sets whether or not to use the function to enlarge the screen display. ([Off]/[On (Custom Btn 2)])
When you select [On (Custom Btn 2)], the screen display is enlarged by pressing the C2 button (Custom button 2).
Magnification:
Sets the magnification to use for the function to enlarge the screen display. ([x1.5]/[x2.0]/[x2.5])


To magnify the menu screen display

On the menu screen, press the button specified in [Enlarge Menu Scrn] to magnify the screen display.

  • You can move the displayed position using the multi-selector, front dial, rear dial L, or rear dial R or by turning the control wheel.
  • Each time you press the button, the magnification scale changes.
  • To cancel the magnified display, press the button repeatedly until the screen display is back to normal.

Hint

  • You can move between items using the top/bottom/left/right side of the control wheel even when the screen display is magnified. You can also confirm items using the center button.
  • You can move the displayed position using touch operations while the screen display is magnified when [Touch Operation] is set to [On] and [Menu Screen] under [Touch Panel Settings] is set to [On].
  • You can also assign [Enlarge Menu Scrn] to some buttons using [Custom Key/Dial Set.]/[Custom Key/Dial Set.].
  • A message confirming whether to set [Select Finder/Monitor] to [Monitor(Manual)] appears when [Enlarge Menu Scrn] is set to anything other than [Off]. It is recommended that you set [Select Finder/Monitor] to [Monitor(Manual)] while using the [Enlarge Screen] function to prevent the eye sensor from activating and switching to the viewfinder display when you bring your face close to the monitor.
    To restore the setting for [Select Finder/Monitor], select [Select Finder/Monitor] and change the setting.
Go to Page Top